Product Link:
https://www.capsulehousemanufacturer.com/products-portable-toilet.html
1.Water-flush and non-water-flush suction mobile toilets
Water-flush mobile toilets have water-flush devices. Generally, the water tank is placed on the top of the toilet, and a sewage tank is set at the bottom of the toilet. However, non-water-flush mobile toilets do not have flushing devices, and the sewage tank set at the bottom of the toilet directly receives the excrement of the users.
Since the sewage tank capacity of these two types of mobile toilets is small, when the specified number of people is used, it is necessary to pump in time, otherwise overflowing events are likely to occur, and the pumping frequency is high.
2. Circulating water-flush mobile toilets
This type of mobile toilet is equipped with intermittent aerobic and anaerobic fecal sewage treatment devices, and biological strains are added. Biofilm technology is used to accelerate the fermentation and decomposition of fecal sewage, and then the treated fecal sewage is recycled through the filtration device for flushing toilets. Its characteristics are the use of advanced fecal sewage treatment technology, saving precious water resources, reducing the number of fecal sewage suction, and fully demonstrating the concept of environmental protection.
3. Dry-type packaged mobile toilets
This type of mobile toilet has no water flushing device. The excrement is taken by a degradable plastic bag placed at the bottom of the toilet. Each time a person uses it, another new plastic bag is automatically replaced. After use, the plastic bags are collected and transported to the treatment plant for disposal. The characteristics of this mobile toilet are that it does not need water flushing at all, saving water resources and convenient waste collection.
4. Foam-blocking mobile toilets
The foam-blocking mobile toilet uses the foam generated by the foaming liquid mixture to replace the toilet flushing water. When in use, a foam channel is provided on the side wall of the toilet. The compressed air of the foam toilet is conveyed to the foam exciter through the compressed air delivery pipe, so that the foam emitted by the foam box covers the inside of the toilet through the foam channel without odor. Foam is used instead of water to flush the toilet. This system can meet the foaming water by collecting hand-washing water, thus maximizing the water conservation.
5. Microbial mobile toilets
The excrement of the microbial mobile toilet enters the solid-liquid separation device by automatically opening the toilet bowl. The device can filter urine, push feces away and separate them, and then treat them separately.
After the feces are separated, they enter the fermentation tank, where the initial ingredients, sawdust, biological strains and feces are mixed by the rotation of the screw propeller, decomposed by microorganisms, and separated in the form of CO2 and H2O, with a degradation rate of ≥99%; after the urine is filtered, it enters the urine comprehensive treatment system, where it is processed into grey water to flush the urinal through aeration, evaporation, decolorization and other processes, forming a cycle.
